Informations for option: Clexane 20mg/0.2ml Syringes, show other option

Select option:

1. Clexane 20mg/0.2ml Syringes
2. Clexane 20mg/0.2ml Syringes

Document: document 13 change

• document 0
• document 1
• document 2
• document 3
• document 4
• document 5
• document 6
• document 7
• document 8
• document 9
• document 10
• document 11
• document 12
• document 13
• document 14

---

MEDIDA FINAL PLEGADO

<- 300 mm -►

Version No: 1

Date: 16.04.2014

40 mm    40 mm

Clexane contains a medicine called enoxaparin sodium. This belongs to a group of medicines called Low Molecular Weight Heparins.

Clexane works in two ways:

1)    Stopping existing blood clots from getting any bigger. This helps your body to break them down and stop them causing you harm.

2)    Stopping blood clots forming in your blood.

Clexane can be used to:

•    Treat blood clots that are in your blood.

•    Stop blood clots forming in your blood in the following situations:

-    Unstable angina (where not enough blood gets to your heart)

-    After an operation or long periods of bed rest due to illness

-    After you have had a heart attack

•    Stop blood clots forming in the tubes of your dialysis machine (used for people with kidney problems)

2. Before you use Clexane

Do not have this medicine and tell your doctor, pharmacist or nurse if :

• You are allergic (hypersensitive) to enoxaparin sodium or any of the other ingredients of Clexane (listed in Section 6: Further information)

Signs of an allergic reaction include: a rash, swallowing or breathing problems, swelling of your lips, face, throat or tongue

•    You are allergic to heparin or other Low Molecular Weight Heparins such as tinzaparin or dalteparin

•    You have a problem with bruising or bleeding too easily

•    You have an ulcer in your stomach or gut (intestine)

•    You have had a stroke caused by bleeding in the brain

•    You have an infection in your heart

•    You are using the medicine called heparin to treat blood clots

Do not have this medicine if any of the above apply to you. If you are not sure, talk to your doctor, pharmacist, or nurse before having Clexane.

Take special care with Clexane

Check with your doctor or pharmacist or nurse before using this medicine if:

•    You    have high blood pressure

•    You    have kidney problems

•    You have had a heart valve fitted

•    You have ever had bruising and bleeding caused by the medicine ‘heparin'

•    You have ever had a stroke

•    You have ever had a stomach ulcer

•    You    have recently had an operation    on your    eyes    or    brain

•    You    are a diabetic or have a illness    known    as    ‘diabetic    retinopathy' (problems with the blood

vessels in the eye caused by diabetes)

•    You have any problems with your blood

•    You are underweight or overweight

•    You are elderly (over 65 years old) and especially if you are aged over 75 years old

If you are not sure if any of the above applies to you, talk to your doctor or pharmacist or nurse before using Clexane.

Taking or using other medicines

Please tell your doctor, pharmacist or nurse if you are taking or have recently taken any other medicines. This includes medicines you buy without a prescription, including herbal medicines. This is because Clexane can affect the way some other medicines work. Also some medicines can affect the way that Clexane works.

In particular, do not have this medicine and tell your doctor if:

•    you are using the medicine called heparin to treat blood clots.

Tell your doctor if you are taking any of the following medicines:

•    Warfarin - used for thinning the blood

•    Aspirin, dipyridamole, clopidogrel or other medicines - used to stop blood clots forming

•    Dextran injection - used as a blood replacer

•    Ibuprofen, diclofenac, ketorolac or other medicines - used to treat pain and swelling in arthritis and other illnesses

•    Prednisolone, dexamethasone or other medicines - used to treat asthma, rheumatoid arthritis and other conditions

•    Water tablets (diuretics) such as spironolactone, triamterene or amiloride.

These may increase the levels of potassium in your blood when taken with Clexane.

Your doctor may change one of your medicines or take regular blood tests to check that taking these medicines with Clexane is not causing you any harm.

Operations and anaesthetics

If you are going to have a spinal puncture or an operation where an epidural or spinal anaesthetic is used, tell your doctor that you are using Clexane. Tell also your doctor if you have any problem with your spine or if you have ever had spinal surgery.

Pregnancy and breast-feeding

Talk to your doctor before you use this medicine if you are pregnant, might become pregnant, or think you may be pregnant.

You should not use this medicine if you are pregnant and have a mechanical heart valve as you may be at increased risk of developing blood clots. Your doctor should discuss this with you. You should not breast-feed whilst using Clexane. If you are planning to breast-feed, talk to your doctor, pharmacist or nurse.

Ask your doctor or pharmacist for advice before taking any medicine if you are pregnant or breastfeeding.

3. How to use Clexane

Having this medicine

•    Before you use Clexane your doctor or nurse may carry out a blood test

•    While you are in hospital your doctor or nurse will normally give you Clexane. This is because it needs to be given as an injection

•    When you go home you may need to continue to use Clexane and give it to yourself (see below instructions on how to do this)

•    Clexane is usually given by injection underneath the skin (subcutaneous)

If you are not sure why you are receiving Clexane or have any questions about how much Clexane

is being given to you, speak to your doctor, pharmacist or nurse.

How much will be given to you

•    Your doctor will decide how much to give you. The amount of Clexane given to you will depend on the reason it is being used

•    If you have problems with your kidneys, you may be given a smaller amount of Clexane

1)    Treating blood clots that are in your blood

•    The usual dose is 1.5mg for every kilogram of your weight, each day

•    Clexane will usually be given for at least 5 days

2)    Stopping blood clots forming in your blood in the following situations:

a)    Unstable angina

•    The usual amount is 1mg for every kilogram of your weight, every 12 hours

•    Clexane will usually be given for 2 to 8 days. Your doctor will normally ask you to take aspirin as well

b)    After an operation or long periods of bedrest due to illness

The usual dose is 20mg or 40mg each day. The dose will depend on how likely you are to develop a clot

•    If you have a low to medium risk of getting a clot, you will be given 20mg of Clexane each day. If you are going to have an operation, your first injection will usually be given 2 hours before your operation

•    If you have a higher risk of getting a clot, you will be given 40mg each day. If you are going to have an operation, your first injection will usually be given 12 hours before your operation

•    If you are bedridden due to illness, you will normally be given 40mg of Clexane each day for 6 to 14 days

c)    After you have had a heart attack

Clexane can be used for two different types of heart attack called NSTEMI or STEMI. The amount

of Clexane given to you will depend on your age and the kind of heart attack you have had.

i)    NSTEMI type of heart attack

•    The usual amount is 1mg for every kilogram of weight, every 12 hours.

•    Clexane will usually be given for 2 to 8 days. Your doctor will normally ask you to take aspirin as well.

ii)    STEMI type of heart attack

If you are under 75 years old

•    30mg of Clexane will be given as an injection into your vein (intravenous    injection    using

Clexane Multidose Vial or 60, 80 or 100mg Pre-filled syringes).

•    At the same time, you will also be given Clexane as an injection under    your skin    (subcutaneous

injection). The usual dose is 1mg for every kilogram of your weight.

•    Then you will be given 1mg for every kilogram of your weight every 12 hours after that

•    The maximum amount of Clexane given for the first two injections is 100mg

•    The injections will normally be given for up to 8 days.

If you are aged 75 years or older

•    Your doctor or nurse will give you injections of Clexane under your skin (subcutaneous injection)

•    The usual dose is 0.75mg for every kilogram of your weight, every 12 hours

•    The maximum amount of Clexane given for the first two injections is 75mg

For patients having an operation called Percutaneous Coronary Intervention (PCI)

•    Depending on when you were last given Clexane, your doctor may decide to give an additional dose of Clexane before a PCI operation. This is by injection into your vein (intravenous using Clexane Multidose Vial or 60, 80 or 100mg Pre-filled syringes).

3)    Stop blood clots forming in the tubes of your dialysis machine

•    The usual dose is 1mg for every kilogram of your weight

§ • Clexane is added to the tube leaving the body (arterial line) at the start of the dialysis session

•    This amount is usually enough for a 4 hour session. However, your doctor may give you a further dose of 0.5 to 1mg for every kilogram of your weight if necessary.

3 PHARMACEUTICAL FORM

Solution for injection.

Clear, colourless to pale yellow solution.

4.2 Posology and method of administration

Adults:

Prophylaxis of venous thromboembolism:

In patients with a low to moderate risk of venous thromboembolism the recommended dosage is 20 mg (2,000 IU) once daily by subcutaneous injection for 7 to 10 days, or until the risk of thromboembolism has diminished. In patients undergoing surgery, the initial dose should be given approximately 2 hours preoperatively. In patients with a higher risk, such as in orthopaedic surgery, the dosage should be 40 mg (4,000 IU) daily by subcutaneous injection with the initial dose administered approximately 12 hours before surgery. Prophylaxis of venous thromboembolism in medical patients:

The recommended dose of enoxaparin sodium is 40 mg (4,000 IU) once daily by subcutaneous injection. Treatment with enoxaparin sodium is prescribed for a minimum of 6 days and continued until the return to full ambulation, for a maximum of 14 days.

Treatment of venous thromboembolism:

Clexane should be administered subcutaneously as a single daily injection of 1.5 mg/kg (150 IU/kg). Clexane treatment is usually prescribed for at least 5 days and until adequate oral anticoagulation is established.

Dosage chart for 1.5mg/kg SC treatment of DVT, PE or both
Patient weight	kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	60mg / 0.6ml	60 od	0.60
100mg/ml Solution for injection CLEXANE syringes	45 50	80mg / 0.8ml 80mg / 0.8ml	67.5 od 75 od	0.675 0.75
	55	100mg / 1ml	82.5 od	0.825
	60	100mg / 1ml	90 od	0.90
	65	100mg / 1ml	97.5 od	0.975

Dosage chart for 1.5mg/kg SC treatment of DVT, PE or both
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	70	120mg / 0.8ml	105 od	0.70
	75	120mg / 0.8ml	112.5 od	0.76
150mg/ml	80	120mg / 0.8ml	120 od	0.80
Solution for Injection	85	150mg / 1ml	127.5 od	0.86
CLEXANE Forte syringes	90	150mg / 1ml	135 od	0.90
	95	150mg / 1ml	142.5 od	0.96
	100	150mg / 1ml	150 od	1.00

Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

Treatment of unstable angina and non-Q-wave myocardial infarction

The recommended dose is 1 mg/kg Clexane every 12 hours by subcutaneous injection, administered concurrently with oral aspirin (100 to 325mg once daily). Treatment with Clexane in these patients should be prescribed for a minimum of 2 days and continued until clinical stabilisation. The usual duration of treatment is 2 to 8 days.

Dosage chart for 1mg/kg SC treatment of UA or NSTEMI

Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	40mg / 0.4ml	40 bd	0.40
	45	60mg / 0.6ml	45 bd	0.45
	50	60mg / 0.6ml	50 bd	0.50
	55	60mg / 0.6ml	55 bd	0.55
100mg/ml	60	60mg / 0.6ml	60 bd	0.60
Solution for	65	80mg / 0.8ml	65 bd	0.65
Injection	70	80mg / 0.8ml	70 bd	0.70
CLEXANE	75	80mg / 0.8ml	75 bd	0.75
syringes	80	80mg / 0.8ml	80 bd	0.80
	85	100mg / 1ml	85 bd	0.85
	90	100mg / 1ml	90 bd	0.90
	95	100mg / 1ml	95 bd	0.95
	100	100mg / 1ml	100 bd	1.00

Dosage chart for 1mg/kg SC treatment of UA or NSTEMI
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	105	120mg / 0.8ml	105 bd	0.70
	110	120mg / 0.8ml	110 bd	0.74
	115	120mg / 0.8ml	115 bd	0.78
150mg/ml Solution for	120	120mg / 0.8ml	120 bd	0.80
	125	150mg / 1ml	125 bd	0.84
Injection CLEXANE Forte
syringes	130	150mg / 1ml	130 bd	0.88
	135	150mg / 1ml	135 bd	0.90
	140	150mg / 1ml	140 bd	0.94
	145	150mg / 1ml	145 bd	0.98
	150	150mg / 1ml	150 bd	1.00

Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

Treatment of acute ST-segment Elevation Myocardial Infarction

The recommended dose of enoxaparin sodium is a single IV bolus of 30mg plus a 1mg/kg SC dose followed by 1mg/kg administered SC every 12 hours (max 100mg for the first two doses only, followed by 1mg/kg dosing for the remaining doses). For dosage in patients >75 years of age, see section 4.2 Posology and method of administration: Elderly.

Dosage chart for 1mg/kg SC treatment of STEMI

Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	40mg / 0.4ml	40 bd	0.40
	45	60mg / 0.6ml	45 bd	0.45
	50	60mg / 0.6ml	50 bd	0.50
	55	60mg / 0.6ml	55 bd	0.55
100mg/ml	60	60mg / 0.6ml	60 bd	0.60
Solution for	65	80mg / 0.8ml	65 bd	0.65
Injection	70	80mg / 0.8ml	70 bd	0.70
CLEXANE	75	80mg / 0.8ml	75 bd	0.75
syringes	80	80mg / 0.8ml	80 bd	0.80
	85	100mg / 1ml	85 bd	0.85
	90	100mg / 1ml	90 bd	0.90
	95	100mg / 1ml	95 bd	0.95
	100	100mg / 1ml	100 bd	1.00

Dosage chart for 1mg/kg SC treatment of STEMI
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	105	120mg / 0.8ml (1)	105 bd (1)	0.70 (1)
	110	120mg / 0.8ml (1)	110 bd (1)	0.74 (1)
150mg/ml	115	120mg / 0.8ml (1)	115 bd (1)	0.78 (1)
Solution for	120	120mg / 0.8ml (1)	120 bd (1)	0.80 (1)
Injection	125	150mg / 1ml (1)	125 bd (1)	0.84 (1)
CLEXANE	130	150mg / 1ml (1)	130 bd (1)	0.88 (1)
Forte	135	150mg / 1ml (1)	135 bd (1)	0.90 (1)
syringes	140	150mg / 1ml (1)	140 bd (1)	0.94 (1)
	145	150mg / 1ml (1)	145 bd (1)	0.98 (1)
	150	150mg / 1ml (1)	150 bd (1)	1.00 (1)

(1) Not to be given for the first two doses - (maximum 100mg for the first two doses only, followed by 1mg/ kg dosing for the remaining doses). Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

When administered in conjunction with a thrombolytic (fibrin specific or non-fibrin specific) enoxaparin sodium should be given between 15 minutes before and 30 minutes after the start of fibrinolytic therapy. All patients should receive acetylsalicylic acid (ASA) as soon as they are identified as having STEMI and maintained under (75 to 325mg once daily) unless contraindicated.

The recommended duration of enoxaparin sodium treatment is 8 days or until hospital discharge, whichever comes first. For patients managed with Percutaneous Coronary Intervention (PCI): If the last enoxaparin sodium SC administration was given less than 8 hours before balloon inflation, no additional dosing is needed. If the last SC administration was given more than 8 hours before balloon inflation, an IV bolus of 0.3mg/kg of enoxaparin sodium should be administered.

Prevention of extracorporeal thrombus formation during haemodialysis:

A dose equivalent to 1 mg/kg (100 IU/kg) introduced into the arterial line at the beginning of a dialysis session is usually sufficient for a 4 hour session. If fibrin rings are found, such as after a longer than normal session, a further dose of 0.5 to 1mg/kg (50 to 100 IU/kg) may be given. For patients at a high risk of haemorrhage

continued overleaf

If you have more Clexane than you should

If you think that you have used too much or too little Clexane, tell your doctor, nurse or pharmacist immediately, even if you have no signs of a problem. If a child accidentally injects or swallows Clexane, take them to a hospital casualty department straight away.

If you forget to use Clexane

If you forget to give yourself a dose, have it as soon as you remember. Do not give yourself a double dose on the same day to make up for a forgotten dose. Keeping a diary will help to make sure you do not miss a dose.

If you stop using Clexane

It is important for you to keep having Clexane injections until your doctor decides to stop them. If you stop, you could get a blood clot which can be very dangerous.

Blood Tests

Using Clexane may affect the results of some blood tests. If you are going to have a blood test, it is important to tell your doctor you are having Clexane.

4. Possible side effects

Like all medicines, Clexane can cause side effects, although not everybody gets them.

Tell a nurse or doctor or go to hospital straight away if you notice any of the following side effects:

Very common (affects more than 1 in 10 people)

•    Bleeding a lot from a wound.

Common (affects 1 to 10 people in a 100)

•    A painful rash of dark red spots under the skin which do not go away when you put pressure on them. You may also notice pink patches on your skin. These are more likely to appear in the area you have been injected with Clexane.

Uncommon (affects 1 to 10 people in a 1,000)

• Sudden severe headache. This could be a sign of bleeding in the brain.

• A feeling of tenderness and swelling in your stomach. You may have bleeding inside your stomach.

Rare (affects less than 1 in a 1000 people)

•    If you have an allergic reaction. The signs may include: a rash, swallowing or breathing problems, swelling of your lips, face, throat or tongue.

Frequency unknown

•    If you have had a spinal puncture or a spinal anaesthetic and notice tingling, numbness and muscular weakness, particularly in the lower part of your body. Also if you lose control over your bladder or bowel (so you cannot control when you go to the toilet).

Tell a nurse or doctor as soon as possible if you notice any of the following side effects:

Common (affects 1 to 10 people in a 100)

• You bruise more easily than usual. This could be because of a blood problem (thrombocytopenia).

• You have pain, swelling or irritation in the area you have been injected with Clexane. This normally gets better after a few days.

Rare (affects less than 1 in a 1000 people)

•    If you have a mechanical heart valve, treatment with Clexane might not be sufficient to prevent blood clots. You may notice that you have difficulty breathing, tiredness or difficulty exercising, chest pain, numbness, feeling sick or loss of consciousness. This could be due to a blood clot on the heart valve

Frequency unknown

•    Feeling tired, faint, dizzy, having pale skin. These could be symptoms of anaemia.

•    You notice yellowing of your skin or eyes and your urine becomes darker in colour. This could be a liver problem.

Other side effects that you should discuss with your nurse or doctor if you are concerned about

them:

Very common (affects more than 1 in 10 people)

•    Changes in the results of blood tests done to check how your liver is working. These usually go back to normal after you stop having Clexane.

Rare (affects less than 1 in a 1000 people)

•    Changes in the potassium levels in your blood. This is more likely to happen in people with kidney problems or diabetes. Your doctor will be able to check this by carrying out a blood test.

Frequency unknown

•    If Clexane is used for a long period of time (more than 3 months), it may may increase the risk of you getting a condition called ‘osteoporosis'. This is when your bones are more likely to break.

•    Headache

•    Hair loss

Reporting of side effects

If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this leaflet. You can also report side effects directly via the Yellow Card Scheme at: www.mhra.gov.uk/yellowcard

By reporting side effects you can help provide more information on the safety of this medicine.

5. How to store and dispose of Clexane

•    Keep out of the sight and reach of children.

•    Do not store above 25°C. Do not refrigerate or freeze.

•    Store in the original container.

•    Do not use this medicine after the expiry date which is printed on the carton label. The expiry date refers to the last day of that month.

•    If your doctor tells you to stop using this medicine, return any unused syringes to your pharmacist for safe disposal. Only keep this medicine, if your doctor tells you to.

•    If your injection show signs of deterioration or discolouration, you should seek the advice of your pharmacist who will tell you what to do.

Medicines should not be disposed of via wastewater or household waste. If you are using this medicine at home you will be given a container (a sharps bin) to use for disposal. Return the sharps bin or any used or unused syringes to your doctor, nurse or pharmacist for disposal. These measures will help to protect the environment.

6. Further Information

Your medicine is called Clexane 20mg / 0.2ml Syringes.

It is a clear, colourless solution in a pre-filled syringe with a white plunger and grey protective needle cap.

Clexane is available in cartons containing 10 syringes.

What is in your medicine

Each pre-filled syringe contains 20mg enoxaparin sodium (2000 I.I anti-Xa activity) in 0.2ml water for injections.

Also includes water for injection.

Who manufactured your medicine

Manufactured by Sanofi Winthrop Industrie, Boulevard industriel. Zone industrielle (Le Trait), 76580-France. Procured from within the EU and repackaged by Product Licence Holder Boticalia Ltd, 27 Acton Park, The Vale, London W3 7QE.

PL 23038/0174

Leaflet date: 14.04.2014

Clexane is a trademark of Aventis Pharma SA

The recommended dosage adjustments do not apply to the haemodialysis indication.

Moderate and mild renal impairment:

Although no dosage adjustments are recommended in patients with moderate renal impairment (creatinine clearance 30-50 ml/min) or mild renal impairment (creatinine clearance 50-80 ml/min), careful clinical monitoring is advised.

Hepatic impairment: In the absence of clinical studies, caution should be exercised.

Body weight:

No dosage adjustments are recommended in obesity or low body weight (see also section 4.4 Special warnings and precautions for use: Low body weight and Monitoring; section 5.2 Pharmacokinetic properties). Clexane is administered by subcutaneous injection for the prevention of venous thromboembolic disease, treatment of deep vein thrombosis or for the treatment of unstable angina, non-Q-wave myocardial infarction and acute ST elevation myocardial infarction (STEMI); through the arterial line of a dialysis circuit for the prevention of thrombus formation in the extra-corporeal circulation during haemodialysis; and via intravenous (bolus) injection through an intravenous line only for the initial dose of acute STEMI indication and before PCI when needed. It must not be administered by the intramuscular route.

Subcutaneous injection technique

The prefilled disposable syringe is ready for immediate use. Clexane should be administered when the patient is lying down by deep subcutaneous injection. The administration should be alternated between the left and right anterolateral or posterolateral abdominal wall. The whole length of the needle should be introduced vertically into a skin fold held between the thumb and index finger. The skin fold should not be released until the injection is complete.

Do not rub the injection site after administration.

Intravenous (Bolus) Injection Technique (for acute STEMI indication only):

For intravenous injection, either the Multidose Vial or 60mg, 80mg or 100mg prefilled syringes can be used. Enoxaparin sodium should be administered through an intravenous line. It should not be mixed or coadministered with other medications. To avoid the possible mixture of enoxaparin sodium with all other drugs, the intravenous access chosen should be flushed with a sufficient amount of saline or dextrose solution prior to and following the intravenous bolus administration of enoxaparin sodium to clear the port of drug. Enoxaparin sodium may be safely administered with normal saline solution (0.9%) or 5% dextrose in water.

•    Initial 30mg bolus

For the initial 30mg bolus, using an enoxaparin sodium graduated prefilled syringe (60, 80 or 100mg), expel the excessive volume to retain only 30mg (0.3ml) in the syringe. The 30mg dose can then be directly injected into an injection site in the intravenous line.

•    Additional bolus for PCI when last SC administration was given more than 8 hours before balloon insertion

For patients being managed with Percutaneous Coronary Intervention (PCI), an additional IV bolus of 0.3mg/ kg is to be administered if last SC administration was given more than 8 hours before balloon inflation (see section 4.2 Posology and method of administration: Treatment of acute ST-segment Elevation Myocardial Infarction).

In order to assure the accuracy of the small volume to be injected, it is recommended to dilute the drug to 3mg/ml.

To obtain a 3mg/ml solution, using a 60mg enoxaparin sodium prefilled syringe, it is recommended to use a 50ml infusion bag (i.e. using either normal saline solution (0.9%) or 5% dextrose in water) as follows: Withdraw 30ml from the infusion bag with a syringe and discard the liquid. Inject the complete contents of the 60mg enoxaparin sodium prefilled syringe into the 20ml remaining in the bag. Gently mix the contents of the bag. Withdraw the required volume of diluted solution with a syringe for administration into the intravenous line (using an appropriate injection site or port).

After dilution is completed, the volume to be injected can be calculated using the following formula [Volume of diluted solution (ml) = Patient weight (kg) x 0.1] or using the table below. It is recommended to prepare the dilution immediately before use and to discard any remaining solution immediately after use.

Volume to be injected through intravenous line after dilution is completed

Weight	Required dose (0.3mg/kg)	Volume to inject when diluted to a final concentration of 3mg/ml	Weight	Required dose (0.3mg/kg)	Volume to inject when diluted to a final concentration of 3mg/ml
(Kg)	(mg)	(ml)	(Kg)	(mg)	(ml)
45	13.5	4.5	100	30	10
50	15	5	105	31.5	10.5
55	16.5	5.5	110	33	11
60	18	6	115	34.5	11.5
65	19.5	6.5	120	36	12
70	21	7	125	37.5	12.5
75	22.5	7.5	130	39	13
80	24	8	135	40.5	13.5
85	25.5	8.5	140	42	14
90	27	9	145	43.5	14.5
95	28.5	9.5	150	45	15

6 PHARMACEUTICAL PARTICULARS

6.1    List of excipients

Water for Injections

6.2    Incompatibilities Subcutaneous Injection

Clexane should not be mixed with any other injections or infusions.

Intravenous (Bolus) Injection for acute STEMI indication only

Enoxaparin sodium may be safely administered with normal saline solution (0.9%) or 5% in dextrose in water.

6.3    Shelf life 36 months

6.4    Special precautions for storage

Do not store above 25°C. Do not refrigerate or freeze.

Store in the original container.

Clexane pre-filled syringes are single dose containers - discard any unused product

6.5    Nature and contents of container

It is a clear, colourless solution in a pre-filled syringe with a white plunger and grey protective needle cap. Clexane is available in cartons containing 10 syringes.

6.6    Special precautions for disposal

See section 4.2 Posology and method of administration.

9    DATE OF FIRST AUTHORISATION/RENEWAL OF THE AUTHORISATION

Date of first authorisation: 22 October 1990 Date of latest renewal: 8 August 2002

10    DATE OF REVISION OF THE TEXT

14.04.2014

40 mm    40 mm

Clexane contains a medicine called enoxaparin sodium. This belongs to a group of medicines called Low Molecular Weight Heparins.

Clexane works in two ways:

1)    Stopping existing blood clots from getting any bigger. This helps your body to break them down and stop them causing you harm.

2)    Stopping blood clots forming in your blood.

Clexane can be used to:

•    Treat blood clots that are in your blood.

•    Stop blood clots forming in your blood in the following situations:

-    Unstable angina (where not enough blood gets to your heart)

-    After an operation or long periods of bed rest due to illness

-    After you have had a heart attack

•    Stop blood clots forming in the tubes of your dialysis machine (used for people with kidney problems)

2. Before you use Clexane

Do not have this medicine and tell your doctor, pharmacist or nurse if :

• You are allergic (hypersensitive) to enoxaparin sodium or any of the other ingredients of Clexane (listed in Section 6: Further information) Signs of an allergic reaction include: a rash, swallowing or breathing problems, swelling of your lips, face, throat or tongue

•    You are allergic to heparin or other Low Molecular Weight Heparins such as tinzaparin or dalteparin

•    You have a problem with bruising or bleeding too easily

•    You have an ulcer in your stomach or gut (intestine)

•    You have had a stroke caused by bleeding in the brain

•    You have an infection in your heart

•    You are using the medicine called heparin to treat blood clots

Do not have this medicine if any of the above apply to you. If you are not sure, talk to your doctor, pharmacist, or nurse before having Clexane.

Take special care with Clexane

Check with your doctor or pharmacist or nurse before using this medicine if:

•    You have high blood pressure

•    You have kidney problems

•    You have had a heart valve fitted

•    You have ever had bruising and bleeding caused by the medicine ‘heparin'

•    You have ever had a stroke

•    You have ever had a stomach ulcer

•    You have recently had an operation on your eyes or brain

•    You are a diabetic or have a illness known as ‘diabetic retinopathy' (problems with the blood vessels in the eye caused by diabetes)

•    You have any problems with your blood

•    You are underweight or overweight

•    You are elderly (over 65 years old) and especially if you are aged over 75 years old

If you are not sure if any of the above applies to you, talk to your doctor or pharmacist or nurse before using Clexane.

Taking or using other medicines

Please tell your doctor, pharmacist or nurse if you are taking or have recently taken any other medicines. This includes medicines you buy without a prescription, including herbal medicines. This is because Clexane can affect the way some other medicines work. Also some medicines can affect the way Clexane works.

In particular, do not have this medicine and tell your doctor if:

•    you are using the medicine called heparin to treat blood clots.

Tell your doctor if you are taking any of the following medicines:

•    Warfarin - used for thinning the blood

•    Aspirin, dipyridamole, clopidogrel or other medicines - used to stop blood clots forming

•    Dextran injection - used as a blood replacer

•    Ibuprofen, diclofenac, ketorolac or other medicines - used to treat pain and swelling in arthritis and other illnesses

•    Prednisolone, dexamethasone or other medicines - used to treat asthma, rheumatoid arthritis and other conditions

•    Water tablets (diuretics) such as spironolactone, triamterene or amiloride. These may increase the levels of potassium in your blood when taken with Clexane.

Your doctor may change one of your medicines or take regular blood tests to check that taking these medicines with Clexane is not causing you any harm.

Operations and anaesthetics

If you are going to have a spinal puncture or an operation where an epidural or spinal anaesthetic is used, tell your doctor that you are using Clexane. Tell also your doctor if you have any problem with your spine or if you have ever had spinal surgery.

Pregnancy and breast-feeding

Talk to your doctor before you use this medicine if you are pregnant, might become pregnant, or think you may be pregnant.

You should not use this medicine if you are pregnant and have a mechanical heart valve as you may be at increased risk of developing blood clots. Your doctor should discuss this with you.

You should not breast-feed whilst using Clexane. If you are planning to breast-feed, talk to your doctor, pharmacist or nurse.

Ask your doctor or pharmacist for advice before taking any medicine if you are pregnant or breastfeeding.

3. How to use Clexane

Having this medicine

•    Before you use Clexane your doctor or nurse may carry out a blood test

•    While you are in hospital your doctor or nurse will normally give you Clexane. This is because it needs to be given as an injection

•    When you go home you may need to continue to use Clexane and give it to yourself (see below instructions on how to do this)

•    Clexane is usually given by injection underneath the skin (subcutaneous)

If you are not sure why you are receiving Clexane or have any questions about how much Clexane is being given to you, speak to your doctor, pharmacist or nurse.

How much will be given to you

•    Your doctor will decide how much to give you. The amount of Clexane given to you will depend on the reason it is being used

•    If you have problems with your kidneys, you may be given a smaller amount of Clexane

1)    Treating blood clots that are in your blood

•    The usual dose is 1.5mg for every kilogram of your weight, each day

•    Clexane will usually be given for at least 5 days

2)    Stopping blood clots forming in your blood in the following situations:

a)    Unstable angina

•    The usual amount is 1mg for every kilogram of weight, every 12 hours

•    Clexane will usually be given for 2 to 8 days. Your doctor will normally ask you to take aspirin as well

b)    After an operation or long periods of bedrest due to illness

The usual dose is 20mg or 40mg each day. The dose will depend on how likely you are to develop a clot

•    If you have a low to medium risk of getting a clot, you will be given 20mg of Clexane each day. If you are going to have an operation, your first injection will usually be given 2 hours before your operation

•    If you have a higher risk of getting a clot, you will be given 40mg each day. If you are going to have an operation, your first injection will usually be given 12 hours before your operation

•    If you are bedridden due to illness, you will normally be given 40mg of Clexane each day for 6 to 14 days

c)    After you have had a heart attack

Clexane can be used for two different types of heart attack called NSTEMI or STEMI. The amount of Clexane given to you will depend on your age and the kind of heart attack you have had.

i)    NSTEMI type of heart attack

•    The usual amount is 1mg for every kilogram of weight, every 12 hours.

•    Clexane will usually be given for 2 to 8 days. Your doctor will normally ask you to take aspirin as well.

ii)    STEMI type of heart attack If you are under 75 years old

•    30mg of Clexane will be given as an injection into    your vein (intravenous    injection    using

Clexane Multidose Vial or 60, 80 or 100mg Pre-filled    syringes)

•    At the same time, you will also be given Clexane as an    injection under your    skin    (subcutaneous

injection). The usual dose is 1mg for every kilogram    of your weight

•    Then you will be given 1mg for every kilogram of your weight every 12 hours after that

•    The maximum amount of Clexane given for the first two injections is 100mg

•    The injections will normally be given for up to 8 days If you are aged 75 years or older

•    Your doctor or nurse will give you injections of Clexane under your skin (subcutaneous injection)

•    The usual dose is 0.75mg for every kilogram of your weight, every 12 hours

•    The maximum amount of Clexane given for the first two injections is 75mg For patients having an operation called Percutaneous Coronary Intervention (PCI)

•    Depending on when you were last given Clexane, your doctor may decide to give an additional dose of Clexane before a PCI operation. This is by injection into your vein (intravenous using Clexane Multidose Vial or 60, 80 or 100mg Pre-filled syringes)

3)    Stop blood clots forming in the tubes of your dialysis machine

§ • The usual dose is 1mg for every kilogram of your weight

•    Clexane is added to the tube leaving the body (arterial line) at the start of the dialysis session

•    This amount is usually enough for a 4 hour session. However, your doctor may give you a further dose of 0.5 to 1mg for every kilogram of your weight if necessary.

3 PHARMACEUTICAL FORM

Solution for injection.

Clear, colourless to pale yellow solution.

4.2 Posology and method of administration

Adults:

Prophylaxis of venous thromboembolism:

In patients with a low to moderate risk of venous thromboembolism the recommended dosage is 20 mg (2,000 IU) once daily by subcutaneous injection for 7 to 10 days, or until the risk of thromboembolism has diminished. In patients undergoing surgery, the initial dose should be given approximately 2 hours preoperatively. In patients with a higher risk, such as in orthopaedic surgery, the dosage should be 40 mg (4,000 IU) daily by subcutaneous injection with the initial dose administered approximately 12 hours before surgery. Prophylaxis of venous thromboembolism in medical patients:

The recommended dose of enoxaparin sodium is 40 mg (4,000 IU) once daily by subcutaneous injection. Treatment with enoxaparin sodium is prescribed for a minimum of 6 days and continued until the return to full ambulation, for a maximum of 14 days.

Treatment of venous thromboembolism:

Clexane should be administered subcutaneously as a single daily injection of 1.5 mg/kg (150 IU/kg). Clexane treatment is usually prescribed for at least 5 days and until adequate oral anticoagulation is established.

Dosage chart for 1.5mg/kg SC treatment of DVT, PE or both
Patient weight	kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	60mg / 0.6ml	60 od	0.60
100mg/ml Solution for injection CLEXANE syringes	45 50	80mg / 0.8ml 80mg / 0.8ml	67.5 od 75 od	0.675 0.75
	55	100mg / 1ml	82.5 od	0.825
	60	100mg / 1ml	90 od	0.90
	65	100mg / 1ml	97.5 od	0.975

Dosage chart for 1.5mg/kg SC treatment of DVT, PE or both
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	70	120mg / 0.8ml	105 od	0.70
	75	120mg / 0.8ml	112.5 od	0.76
150mg/ml	80	120mg / 0.8ml	120 od	0.80
Solution for Injection	85	150mg / 1ml	127.5 od	0.86
CLEXANE Forte syringes	90	150mg / 1ml	135 od	0.90
	95	150mg / 1ml	142.5 od	0.96
	100	150mg / 1ml	150 od	1.00

Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

Treatment of unstable angina and non-Q-wave myocardial infarction

The recommended dose is 1 mg/kg Clexane every 12 hours by subcutaneous injection, administered concurrently with oral aspirin (100 to 325mg once daily). Treatment with Clexane in these patients should be prescribed for a minimum of 2 days and continued until clinical stabilisation. The usual duration of treatment is 2 to 8 days.

Dosage chart for 1mg/kg SC treatment of UA or NSTEMI

Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	40mg / 0.4ml	40 bd	0.40
	45	60mg / 0.6ml	45 bd	0.45
	50	60mg / 0.6ml	50 bd	0.50
	55	60mg / 0.6ml	55 bd	0.55
100mg/ml	60	60mg / 0.6ml	60 bd	0.60
Solution for	65	80mg / 0.8ml	65 bd	0.65
Injection	70	80mg / 0.8ml	70 bd	0.70
CLEXANE	75	80mg / 0.8ml	75 bd	0.75
syringes	80	80mg / 0.8ml	80 bd	0.80
	85	100mg / 1ml	85 bd	0.85
	90	100mg / 1ml	90 bd	0.90
	95	100mg / 1ml	95 bd	0.95
	100	100mg / 1ml	100 bd	1.00

Dosage chart for 1mg/kg SC treatment of UA or NSTEMI
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	105	120mg / 0.8ml	105 bd	0.70
	110	120mg / 0.8ml	110 bd	0.74
	115	120mg / 0.8ml	115 bd	0.78
150mg/ml Solution for	120	120mg / 0.8ml	120 bd	0.80
	125	150mg / 1ml	125 bd	0.84
Injection CLEXANE Forte
syringes	130	150mg / 1ml	130 bd	0.88
	135	150mg / 1ml	135 bd	0.90
	140	150mg / 1ml	140 bd	0.94
	145	150mg / 1ml	145 bd	0.98
	150	150mg / 1ml	150 bd	1.00

Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

Treatment of acute ST-segment Elevation Myocardial Infarction

The recommended dose of enoxaparin sodium is a single IV bolus of 30mg plus a 1mg/kg SC dose followed by 1mg/kg administered SC every 12 hours (max 100mg for the first two doses only, followed by 1mg/kg dosing for the remaining doses). For dosage in patients >75 years of age, see section 4.2 Posology and method of administration: Elderly.

Dosage chart for 1mg/kg SC treatment of STEMI

Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	40	40mg / 0.4ml	40 bd	0.40
	45	60mg / 0.6ml	45 bd	0.45
	50	60mg / 0.6ml	50 bd	0.50
	55	60mg / 0.6ml	55 bd	0.55
100mg/ml	60	60mg / 0.6ml	60 bd	0.60
Solution for	65	80mg / 0.8ml	65 bd	0.65
Injection	70	80mg / 0.8ml	70 bd	0.70
CLEXANE	75	80mg / 0.8ml	75 bd	0.75
syringes	80	80mg / 0.8ml	80 bd	0.80
	85	100mg / 1ml	85 bd	0.85
	90	100mg / 1ml	90 bd	0.90
	95	100mg / 1ml	95 bd	0.95
	100	100mg / 1ml	100 bd	1.00

Dosage chart for 1mg/kg SC treatment of STEMI
Patient weight	Kg	Syringe label	Dose (mg)	Injection volume (ml)
	105	120mg / 0.8ml (1)	105 bd (1)	0.70 (1)
	110	120mg / 0.8ml (1)	110 bd (1)	0.74 (1)
150mg/ml	115	120mg / 0.8ml (1)	115 bd (1)	0.78 (1)
Solution for	120	120mg / 0.8ml (1)	120 bd (1)	0.80 (1)
Injection	125	150mg / 1ml (1)	125 bd (1)	0.84 (1)
CLEXANE	130	150mg / 1ml (1)	130 bd (1)	0.88 (1)
Forte	135	150mg / 1ml (1)	135 bd (1)	0.90 (1)
syringes	140	150mg / 1ml (1)	140 bd (1)	0.94 (1)
	145	150mg / 1ml (1)	145 bd (1)	0.98 (1)
	150	150mg / 1ml (1)	150 bd (1)	1.00 (1)

(1) Not to be given for the first two doses - (maximum 100mg for the first two doses only, followed by 1mg/ kg dosing for the remaining doses). Please be aware that in some cases it is not possible to achieve an exact dose due to the graduations on the syringe and so some of the volumes recommended in this table have been rounded up to the nearest graduation.

When administered in conjunction with a thrombolytic (fibrin specific or non-fibrin specific) enoxaparin sodium should be given between 15 minutes before and 30 minutes after the start of fibrinolytic therapy. All patients should receive acetylsalicylic acid (ASA) as soon as they are identified as having STEMI and maintained under (75 to 325mg once daily) unless contraindicated.

The recommended duration of enoxaparin sodium treatment is 8 days or until hospital discharge, whichever comes first. For patients managed with Percutaneous Coronary Intervention (PCI): If the last enoxaparin sodium SC administration was given less than 8 hours before balloon inflation, no additional dosing is needed. If the last SC administration was given more than 8 hours before balloon inflation, an IV bolus of 0.3mg/kg of enoxaparin sodium should be administered.

Prevention of extracorporeal thrombus formation during haemodialysis:

A dose equivalent to 1 mg/kg (100 IU/kg) introduced into the arterial line at the beginning of a dialysis session is usually sufficient for a 4 hour session. If fibrin rings are found, such as after a longer than normal session, a further dose of 0.5 to 1mg/kg (50 to 100 IU/kg) may be given. For patients at a high risk of haemorrhage

t